What does wide and sweep on epicenter

How do you adjust the epicenter?

What does an epicenter do for car audio?

The Epicenter detects bass harmonics, then digitally recreates the underlying fundamental for the incredible punch and impact of live music. Your MP3 player thinks your car stereo is a pair of headphones, so it removes the bass!

What is epicenter knob?

The Epicenter remote knob controls the amount of Epicenter effect that is added to the existing signal. The more you turn it up, the more bass frequencies are added to your audio signal. If you turn it all the way down, it is adding almost no additional bass frequencies to the audio signal.

How do you wire an epicenter?

Is the epicenter a crossover?

A crossover filters out certain frequencies that you don’t want your speakers to play. Like setting a low pass filter to just play 80hz and below and the high pass 80hz and up. The epicenter is a bass restoration processor. It basically boosts bass.

What does a bass restorer do?

Although adding a subwoofer to your car audio system will definitely allow you to hear more of those low frequencies, a bass restoration processor digitally restores that heart-pounding bass that is still missing from your music. …

Do you need an EQ and crossover?

Does a crossover improve sound quality? Crossovers can help with sound quality but not the same way that an equalizer does. … A properly setup speaker system using crossovers will have much better sound than one without it. You can also drive the speakers with more power and volume than you could otherwise.

What goes first EQ or crossover?

We always recommend you put the Epicenter® BEFORE an EQ or crossover.

What does a soundstream BX 108Z do?

Product Features. Bass Restoration: The BX-108Z contains a Bass Restoration circuit that accurately injects Low-frequency information back into the signal path. What that means in simple terms is that the BX-108Z will give more bass impact to your collection of music.

Does a crossover improve sound quality?

For instance, very basic systems that use coaxial speakers actually have small crossovers built right into the speakers. … By making sure that only the right frequencies reach the right speakers, you can effectively reduce distortion and help improve the overall sound quality of a car audio system.

Can tweeters work without crossover?

You may be thinking that it is impossible but in the real sense, tweeters without crossover work very well when installed correctly. For starters, they do not need to be connected with any other speaker for the music to reach your ears. … Tweeters without crossover are also compatible with any vehicle out there.

Can you use an equalizer without an amp?

Car equalizer installation can be done as an independent process without necessarily having an amp installed. … A well equalized car stereo will have superior sound even if not at extremely high volumes.

Do woofers need crossover?

Every audio system, including the one in your car, needs a crossover to direct sound to the correct driver. Tweeters, woofers and subs should get high, mid and low frequencies respectively. Every full-range speaker has a crossover network inside.

Can you run tweeters off an amp?

Here’s the short answer: You cannot use tweeters on a monoblock (bass-only) amp or a subwoofer output channel using a low-pass crossover. You can use tweeters with unused amplifier outputs (channels) that are full-range.

What is the difference between 80hz and 120hz?

80hz tends to work best in most systems for a variety of reasons. But smaller speakers will often begin to sound strained / harsh much lower than 120hz or even 150hz. … These would likely sound best with a crossover much higher than 80hz. If you use low to moderate volume levels 120hz may work adequately.

What do crossovers do for subwoofers?

Setting the Crossover

Crossover is the frequency where speakers begin to roll off, and the subwoofer starts outputting bass notes and LFEs. Most of today’s systems have an EQ feature that will set up the proper crossover automatically based on the specifications of your speakers.

What is the best frequency for tweeters?

Thus, the recommended settings are an HPF (5000 Hz) for the front tweeters, an HPF (80 Hz) for the front midrange, an HPF (80 Hz) for rear speakers, and 12 dB or 24dB slope.

Do tweeters need to be amplified?

Yes it would be amped. The wires to the front will go to the passive crossover, from there a wire will go to the mid and another will go to power the tweeter.

ncG1vNJzZmivp6x7u7PRZ6WerF%2Bau3DAxJyfaKCfrHq1u46wn5qsXZm8pr%2BMsKCdnV2Wu6V50rCcnqhdpLtusc%2Bimp6mpJq%2FcA%3D%3D